Roller Shutter Doors
A Roller Shutter Door is the most functional, robust & hardwearing door suited for many applications from warehouses, your local car dealer, factories to name a few. If damaged the slats can individually be replaced saving dollars and downtime. Suited for high wind applications and securing your property
Roller Shutter Door Brochure
Installation Requirements
- Minimum Headroom: 500mm
- Motorside Side-room: 260mm
- Non-Motorside Side-room: 200mm
Piggyback Rapid Doors/Roller Shutters
The ENVICO door range is ideally suited when combining with other door types for exterior applications. This allows the Maxim to be safely mounted in-front of a conventional steel roller door. This is ideal for exterior applications where both security and productivity are important
Features/Benefits
0.8mm Individual Slats
Curtains are constructed from individually roll formed replaceable interlocking slats for extra strength
Operation Options
- 3 Phs Motor & Gearbox
- 1 Phs LCM (Low Cycle Motor)
- Manual Operation
- Manual Hand Chain Operation
Interlocked Slats
Due to the Steel Slats being interlocked together to form the curtain, this means less damage and buckling will occur. If the door happens to be damaged individual slats can be replaced
Ventilation Option
Ventilated or perforated slat options are available on request
Vent Hole Size: 32mm H x 72mm W
Available Colours
Standard finish is Galvanized but an extensive range of Dulux powder coated colour options are available from the Dulux Duralloy Range
Custom Made
Roller Shutter Doors are custom manufactured to fit the size of your door opening
- Maximum Height: 7.5 metres
- Maximum Width: 7.25 metres
Extruded Aluminium Bottom Rail & Rubber Seal
Each Roller Shutter has a extruded aluminium Bottom Rail for additional strength with Neoprene weather seal to prevent water and dust intake underneath the door
Guides Options
- Standard 50mm Guides
- 90mm Windlocked Guides (High Wind/Security Applications)
Related Products
Dock Levellers & Loading Equipment
Industrial
Vertical Storing Dock Levelers are an ideal Dock option when a superior Contamination prevention or greater energy loss measures are required. The trailer can be parked and the seals deployed before the trailer door are required to be opened. This eliminated the need for the driver to open his trailer or container doors before parking his trailer. Ther vertical dock have a range of safety features and available upgrades to streamline your loading or unloading process. Also due to the dock being vertical storing, you have excellent access to the pit for easy cleaning & maintenance.
Dock Seals & Shelters
Industrial
The Air Frame Inflatable Shelter is a versatile and adaptable element barrier designed to seal gaps while allowing in light. The shelter features two vertical air bags to seal the sides
of the trailer and an inflatable header air bag to seal the top, providing full unrestricted access to the rear of the trailer. It inflates after the trailer has docked and deflates before
departure to minimize wear and tear. The system is powered by a 240V ½ HP continuous running motor and blower assembly.
Safety Bollards
Industrial
Protect your investment with our ‘easy to install’ steel bollards. These are available in a range of finishes to suit your requirements
Bollards are a simple but effective asset protection tool, they are commonly placed at the edges of door openings to protect the door & building from forklifts and other traffic.
“ ”